Mark Jones' Corvair Engine Distributor and MSD Coil Switcher Wire Security
	Home Page
	Fuselage (the boat) | Instrument Panel Panel | Front Deck | Front Deck Hood | Turtle Deck | Engine Cowling Fabrication Canopy  | Canopy Gull Wing Door | Completed Gull Wing Door | Canopy Door Support | Flight Controls | Elevator Trim Tab Corvair Engine (page 1) | Corvair Engine (page 2) | Dual Facet Fuel Pumps | Oil Cooler & Filter | Oil Cooling System Engine Baffles | Intake & Exhaust | Corvair Engine Starter Mount | Dual Ignition | Corvair Engine Mount | LED Rudder Nav Light Matco Brakes & Diehl Gear | Secure Distributor & MSD Wires | Belly Board Speed Brake | Spars & Stub Wing (page 1) Stub Wing (page 2) | Wing, Landing Light, Wing Tip | N886MJ Goes To The Airport | Lost My Spinner | My Car Tags Sensenich Propeller | CorvAIRCRAFT Engine | Body Work & Paint A TRIBUTE TO KEN RAND

	Securing Distributor Boots and MSD Coil Switch Boots.
		I was very concerned about how easy the plug wire boots would slide off the distributor and MSD coil switcher. To remedy this problem, I used plexiglass and made a circle as you can see in the photos. On the distributor, I held the plexi plate on with control cable and wheel collars obtained from a local hobby shop. On the MSD coil switch, I simply bolted the plexi on.